Products Description
No.1 Good performance
Delayed power-off--The first in China
◆The machine will be powered off in case the machine has been powered on but not in use for at least 10 minutes, which is safe and energy-saving.
◆Load sensing hydraulic system Load-sensitive hydraulic system ensures the fork to lift with full load while the engine is running idly so as to reduce fuel consumption.
◆Strengthened chassisIntegrated design with strengthened tail stock ensures safer operation.
◆ Enhanced working unit
Lifting speed is improved by 5%.
◆Three-gear drive mode
Mast, chains and oil tanks of 1-3.5t internal combustion forklift are enhanced for operation with heavy load.
No.2 Safe and reliable
◆Engine electrical system adopts eater-proof connectors
The imported water-proof connectors are more reliable.Water-proof grade Ip65
◆Reliable sealing of oil tank cover
The cover adopts flange sealing against leak.
◆24° cone+Oring
The hydraulic system adopts the most advanced sealing.
◆High quality hydraulic system
The system is equipped with a return oil filter to improve reliability and service life.
◆Battery insulation plate
Insulation plates are provided between the battery and exhaust pipe for 2-3.5t internal combustion forklift to prolong service life of battery.
No.3 High efficiency
◆Spacious cab
Ergonomics-based design ensures easy operation.
◆Wide mast
Wide mast broadens visual field.
No.4 Easy for maintenance
◆Early-waning of instruments service is provided
Regular early-waming of instruments service realizes intelligent service.
◆Large opening angle of engine hood
The engine hood can be lifted to 80° for easy maintenance.
| FD40 | ||||
| Product parameter | ||||
| Model | FD40 | |||
| Rated lifting load | kg | 4000 | ||
| Load center distance | mm | 500 | ||
| Free lifting height | mm | 150 | ||
| overall length ( With fork/Without fork ) | mm | 4000/2930 | ||
| Width | mm | 1290 | ||
| Overhead guard height | mm | 2180 | ||
| Wheelbase | mm | 1900 | ||
| Minimum ground clearance | mm | 140 | ||
| Mast tilt angle (front/rear) | % | 6°/12° | ||
| Tire no. (before) | 250-15-16PR | |||
| Tire no. (after) | 7.00-12-12PR | |||
| Minimum turning radius (outer side) | mm | 2710 | ||
| Minimum right angle aisle width | mm | 4750 | ||
| Fork size | mm | 1070x150x50 | ||
| maximum working speed(Full-load/No-load ) | km/h | 19/19 | ||
| maximum lifting speed(Full-load/No-load ) | mm/s | 340/380 | ||
| maximum gradeability(Full-load/No-load ) | % | 15/20 | ||
| Forklift weight | kg | 4950 | ||
| Engine model | 全柴Quanchai4C4-50V31 or Isuzu | |||
Hot Tags: industrial counterbalance forklifts, China industrial counterbalance forklifts manufacturers, suppliers, Industrial Counterbalance Forklifts, Heavy Diesel Forklift, 5 Ton Diesel Forklift, Forklift, 20t Heavy Duty Diesel Forklift
