Electric hoist installation precautions

The installation of electric hoist is a very important task, not only to prepare for the installation, but also to pay attention to the matters needing attention in the specific installation.
1. In order to ensure that the electric hoist does not derail when it runs to both ends of the track or prevent collisions from damaging the body, elastic buffers should be installed at both ends of the track.
2. When installing the electric hoist, check whether the plug used to fix the wire rope is loose.
3. The grounding wire should be set on the track or its connected frame. The grounding wire can be a bare copper wire of φ4-φ5mm or a metal wire with a cross-section of not less than 25mm².
4. The resistance to ground of all power circuits and control circuits of electrical devices shall not be less than 10000Ω per volt of working voltage.